Safety Instructions - Miele G 863 Plus Operating Instructions Manual

iMPORTANT SAFETY iNSTRUCTiONS
WARNING -
When using your dishwasher, follow
basic precautions, including the
following:
Read aH instructions before installa-
tion or use of the dishwasher to pre-
vent injury and machine damage.
i The manufacturer cannot be held re-
sponsible for damage or injury
caused by improper use of this ap-
pliance.
i Use the dishwasher only for its in-
tended purpose. This appliance is
intended for residential use only.
Electrical safety
Before installation make sure that
i:
the v o,tage and f requency ,,sted on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent iniury and
machine damage. Consult a qualified
electrician if in doubt.
,_,,,,,,,_,_,,_ Before instal,ation or s ervice, dis-
connect the power supply to the
work area by unplugging the unit, "trip-
ping" the circuit breaker or removing
the fuse.
Do not use an extension cord to
:}
i connect this appliance to electric-
ity. Extension cords do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
Be certain your appliance is prop-
erly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance, conti-
nuity must exist between the appliance
and an effective grounding system. It is
imperative that this basic safety require-
ment be met. If there is any doubt, have
the electrical system of the house
checked by a qualified electrician. The
manufacturer cannot be held responsi-
ble for damages caused by the lack, or
inadequacy of, an effective grounding
system.
hstaHation
Installation and repair work should
be by aMiele authorized service
technician. Work by unqualified per-
sons could be dangerous and could
void the warranty.
WARNING - Fire hazard
oo not cover or crush the p, ug of
an electric appliance. Ensure that the
cabinet opening for the dishwasher
provides ample space for the plug.
Insta!ling the dishwasher in a tight
space may crimp the power cord or put
pressure on the plug which may cause
overheating.