Control Panel View; Running The Dishwasher; Waterproof System; At The End Of A Program - Miele G 863 Plus Operating Instructions Manual

Operating the dishwasher
15 16 17 18 19 20 21
1 2 3 4 '
o_
I I
T
22
Running the dishwasher
[] Open the door.
[] Make sure the spray arms are not
blocked.
[] Turn on the dishwasher using the
"On" button (!5).
[] Select a wash program using the pro-
gram selection buttons (22). The se-
lected program indicator will light.
[] Refer to the "Program guide" for de-
tails.
[] Select "Top Solo" or "Delay Start" if
desired. See "Additional features".
[] Close the door.
The red optic indicator will come on.
The program will begin.
Waterproof System
All Miele dishwashers are specially de-
signed to shut off the water intake and
drain the wash cabinet in the rare event
of an internal water valve failure.
For this feature to be active, the ma-
chine must be "On" (not necessarily
running), and the door must be closed.
At the end of a program
At the end of a program the optic indi-
cator will flash.
The optic indicator will go out after an
hour, or sooner if the door is opened.
After a program has ended:
[] Open the door.
The optic indicator and the program in-
dicator will go out.
[] Press the "Off" button (! 6).
Allow dishes to cool before unloading.
It is advisable to turn off the water
i supply if the dishwasher will not be
ii used for a period of time (e.g. while
31