Miele G 863 Plus Operating Instructions Manual page 38

Frequentny asked questions
What if ...
shortly after starting a
program, the dishwasher
stops running and the
optic indicator flashes?
after a program has
Possible fau_t Fix
Water intake error. - Turn off the dishwasher.
The "Drain" indicator - Open the water valve.
flashes. - Clean the water inlet
Drain error. Water remains
in the wash cabinet.
The "Drain" indicator
flashes.
There may be a technical
ended, the optic indica- fault,
tot and the program in-
dicators flash?
there is a knocking
noise in the wash cabi-
net?
there is a rattling noise?
The spray arm is hitting
an item in the baskeL
Items are not secure in
the wash cabineL
This may be caused by
the installation or the di-
ameter of the pipe.
filter, see maintenance
instructions.
- The water pressure is
less than 4.5 psi
(0.3 bar).
Contact a plumber.
- Turn off the dishwasher.
- Clean the triple filter.
See maintenance
instructions.
- Clean the drain pump
and the non-return
valve, see maintenance
instructions.
- Remove any kinks in
the drain hose.
- Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicator lights flash
again after the next pro-
gram cycle, call the Miele
Technical Service Depart-
ment.
Interrupt the program and
rearrange items blocking
arms.
Interrupt the program and
This has no effect on the
dishwashen If in doubt
contact a plumber.
there is a knocking
noise in the water
pipes?
38