Filling The Salf Reservoir - Miele G 863 Plus Operating Instructions Manual

Before using for the first time
Fitling the salt reservoir
If your water hardness level is greater
than 8 gr/ga! (140 ppm), the salt reser-
voir should be filled before the first use
and when the "Salt" indicator lights.
Only use water softener salt specially
formulated for dishwashers. Other salts
may contain insoluble additives which
can impair the water softener.
The proper salt can be purchased from
your Miele dealer or Miele's Technical
Service Department.
To fitt the satt reservoir:
[] Remove the lower basket
[] Unscrew and remove the salt reser-
voir cap located on the floor of the
wash cabinet.
[] Place the provided funnel over the
salt reservoir.
!_lnadvertently filling the satt
reservoir with dishwashing deter=
ii gent will damage the water soft-
Carefully fill with salt. The salt reser-
voir holds approx. 4.5 Ibs (2 kg) of
salt. As it is filled, water will run out.
[] Clean any excess salt from the
threads of the reservoir opening.
[] Screw the cap on firmly.
[] If the dishwasher will not be used im-
mediately, run the "Rinse & Hold" pro-
gram. This will remove any traces of
salt from inside the wash cabinet.
15