NEC POWERMATE eco Service And Reference Manual page 39

Use the Product Recovery CD to perform a Full Disk Drive restore as follows.
1. Disconnect all peripherals and power on the system.
record the current settings, and restore the BIOS default settings. Save the default settings
before exiting the BIOS Setup utility.
2. Load the PowerMate eco Product Recovery CD for the operating system into the CD-ROM
drive. Reboot the system.
Read the License Agreement screen that appears. Click
3.
you decline, the recovery utility exits.
4. At the Product Recovery utility screen, select
original factory installed state.
Read the Warning screen.
5.
A warning is displayed, indicating that the hard drive is about to be erased.
Click
6. Continue
If you click
option.
If you click
the recovery.
When the recovery process is complete, you are prompted to remove the CD from the
CD-ROM drive and reboot the system.
At the prompt, remove the CD from the drive. Press
7.
reboot the system.
A series of hardware detection screens appear, the system reboots, and the Windows Setup
screen appears.
Follow the screen prompts to set up Windows.
8.
2-18 Setup and Configuration
Before using the Product Recovery CD, enter the BIOS Setup utility,
to perform a Full Disk Drive restore.
Do not turn off or disturb the system during the recovery process.
Back , the recovery utility returns to the previous screen, which has an exit
, a screen with progress bars is displayed, indicating the progress of
Continue
to accept the agreement. If
Accept
Full Disk Drive to restore the hard drive to its
, click
Enter Reboot
, or press to
Alt-R