NEC POWERMATE eco Service And Reference Manual page 92

Feature
Bays
Expansion Slots
Communication
PC Card Expansion
I/O Interface Connectors
Controls and LEDs
Operation Board
Interface Board
Legacy Board
Power Management
9-4 Specifications
System Specifications
Specification
2.5-inch bay for hard drive in LCD unit
VersaBay IV type 5-inch bay for optical drive in base unit
PC Card bay for two Type II cards or one Type III card on system board
Mini PCI slot for Type IIIB/PCI module on system board
Memory upgrade socket for SO-DIMM module on system board
LAN — 100Base-TX/10Base-T; remote power on; without AOL
Controller — Intel 82551 on system board
TI PCI1420, support for two Type II cards or one Type III card
USB ports — USB 2.0/1.1; four USB ports: two ports on LCD unit (system
board), two ports on base unit (interface board); 4-pin connectors
Serial port — on LCD unit (legacy board); 9-pin connector
Parallel port — on LCD unit (legacy board); 25-pin connector
PS/2 keyboard port — on LCD unit (legacy board); 6-pin mini DIN 6-
connector
PS/2 mouse port — on LCD unit (legacy board); 6-pin mini DIN connector
Line in jack — on LCD unit (system board); mini jack
Line out jack — on LCD unit (system board); mini jack
Microphone jack — on LCD unit (system board); mini jack
LAN connector — on base unit (legacy board); RJ-45 connector
DC IN connector — on base unit (legacy board)
On operation board in LCD unit
Power/sleep button
LCD brightness buttons — increase brightness button, decrease brightness
button
Volume control dial
Power/sleep LED — green (power), amber (sleep)
Optical/hard drive LED — green
NEC G1AMV — in LCD unit front panel; includes power switch, LEDs,
hardware volume control, and speaker interface
NEC G1AMT — in base unit; includes VersaBay IV, USB, LAN, and DC in
interfaces
NEC G1AMU — in LCD unit on system board shield; includes parallel,
serial, PS/2 keyboard, and PS/2 mouse interfaces
APM and ACPI mode, auto suspend timer set to off in initial setup