NEC POWERMATE eco Service And Reference Manual page 31

Menu Item
Transfer Mode
Ultra DMA Mode
Keyboard Features
Numlock:
Key Click:
Keyboard auto-repeat
rate:
Keyboard auto-repeat
delay:
Legacy USB Support
USB Packet Size
Boot-Time Diagnostics
Screen
System Memory
Extended Memory
2-10 Setup and Configuration
Main Menu Items
Settings (default is bold)
Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, Fast
PIO3/DMA1, Fast PIO4/DMA2
Selects the method for moving data to and from the drive.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Disabled, Mode 0, Mode 1, Mode 2
Selects the Ultra DMA Mode for moving data to and from the
drive. Autotype the drive to select the optimum transfer mode.
When Type is set to Auto, the value in the field is auto-
detected and the field is read only.
Press Enter to check or change keyboard parameters.
Auto, On, Off
Selects the power-on state for Num Lock.
Disabled, Enabled
Enables or disables key click.
30/sec, 26.7/sec, 21.8/sec, 18.5/sec, 13.3/sec, 10/sec, 6/sec,
2/sec
Selects key repeat rate.
1/4 sec, 1/2 sec, 3/4 sec, 1 sec
Selects delay before key repeat.
Disabled, Enabled
Disables or enables legacy USB support.
8, 64
Selects data packet size for BIOS at first detection of USB
devices.
Disabled, Enabled
Selecting Enabled displays the diagnostic screen during boot.
Displays amount of conventional memory detected during
boot.
This field is read-only and cannot be changed from BIOS
Setup.
Displays amount of extended memory detected during boot.
This field is read-only and cannot be changed from BIOS
Setup.