NEC POWERMATE eco Service And Reference Manual page 33

Menu Item
Base I/O
Address
Interrupt
Parallel Port
Base I/O
Address
Interrupt
Mode
Large Disk Access Mode
Local Bus IDE Adapter
QuickBoot Mode
Sound
USB 2.0:
DMI Event Logging
Event Log Capacity
Event Log Validity
View DMI Event Log
Clear All DMI Event
Logs
2-12 Setup and Configuration
Advanced Menu
Settings (default is bold)
3F8, 2F8, 3E8, 2E8
Selects the base I/O address for serial port A.
IRQ3, IRQ4
Selects the IRQ for serial port A.
Disabled, Enabled, Auto
Setting at Enabled allows the user to configure the port.
Setting at Auto enables the BIOS or operating system to
configure the port.
378, 278, 3BC
Selects the base I/O address for the LPT port.
IRQ5, IRQ7
Selects the IRQ for the LPT port.
Output Only, Bi-directional, ECP
Selects parallel port mode.
Other, DOS
Select DOS if using DOS or Windows operating system.
Select Other if using another operating system such as UNIX
or Novell NetWare.
Disabled, Primary, Secondary, Both
Enables the integrated local bus IDE adapter.
Disabled, Enabled
When Enabled, the BIOS does not test system memory above
1 MB or wait for ready signals, allowing a quick boot.
Enabled, Disabled
Select Disabled to turn off onboard sound.
Enabled, Disabled
Press Enter to access the following submenus.
Status only.
Status only.
Status only, press Enter to view.
No, Yes
Selecting No prevents clearing out the DMI event logs.