Sewing on buttons with stems
Insert the sewing foot
Place a match between the holes of the button
and sew it on as described at left
Sewing on buttons
With program 74 you can sew on two and four-hole
buttons with no problem at all.
—
Remove the sewing foot
—
Place the button in the place marked.
—
Turn the hand wheel towards you and position
the button so that the needle enters the left hole
in the button.
—
Now lower the presser bar lifter, the button is now
held by the shank of the foot
—
Now sew on the button. Make sure that the
needle also enters the right hole in the button.
—
The machine sews a tack and the program is
completed.
TIP: You can sew on buttons easier still if you lower
the teed dog.
—
Remove the match and I
01 t
I
it
hi tIP
a
,
of
t,iI
a
apart
—
V'Vrap the steni with ot'wiio; tint ,ttl oaf
lt I 1
49