Sewing In Zippers; Inserting Zippers Concealed On Both Sides - Pfaff electronic 6250 Instruction Book

Place the zipper under the sewing foot so that the
teeth run at the side of the foot. Using program
02, you can set the needle at the required
position.
—
Sew in halt of the zipper, leave the needle in the
material, raise the sewing foot and close the
zipper.
Now you can sew the rest of the seam to the end
of the zipper and stitch the crosswise seam.
Inserting zippers concealed on both sides
—
Engage the zipper toot to the right side.
Sewing in zippers
There are different ways to sew in zippers. For skirts
we recommend inserting the zipper concealed on
both sides, and for men's or ladies' slacks concealed
on one side. Different types of zippers are available in
shops and stores. For firm materials, such as jeans,
we recommend metal zippers. and plastic zippers for
all other materials.
For all types of zippers it is important to sew right up
close to the teeth of the zipper. This is why the zipper
foot can be engaged
iii
the foot holder to the left or
right, depending on the method of
insertion.
U:ing one of the 1 3 needle positions, you can also
ilL
the needle so that it enters close to the edge of
lit' zipper teeth. If the sewing foot is engaged on the
mjla side, the needle position
must
only be changed
to the right. lIthe foot is engaged left, the needle
mu
t
only be moved to the left.
I
S
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
a
a