Winding From The Second/Third Spool Pin - Pfaff Creative 2140 Instruction Manual

2-4
2 Machine Assistant
1. Winding from the second spool pin
Swing the second spool pin (20) up and lock. Place a spool of thread
with an appropriate spool cap on the spool pin.
2. Winding from the third spool pin
Insert
the third spool pin in the hole (21) provided. Place a spool of
thread with an appropriate spool cap on the spool pin.
Threading
Place the thread into thread guide (A) from front to back and pull it
counter clockwise through the pre-tension device (B). Wind the start of
the thread around the bobbin several times in a clockwise direction.
Start bobbin winding by pushing the bobbin lever to the right. As soon
as the bobbin is full, the winding action will be stopped automatically.
Cut the thread and remove the bobbin from the winder