Zigzag Stitch With Right Needle Position; Tapering - Pfaff Creative 2140 Instruction Manual

4.
Zigzag stitch with right needle p
With stitch No. 22,
the right-hand position of the needle
)erc hid
IJhjP
0uthonhoId
brntr
E'eoth Shihche
MbI titch.s
4—°
The width of the zigzag stitch starts at 0 mm and
becomes wider until the previously selected stitch width
is reached. If you press the reverse key, the width is
automatically reduced to 0 mm
*-'
The width of the zigzag stitch tapers to 0 mm and
stops. For mitered corners, pivot your fabric and continue
stitching The stitch will automatically become wider as you
sew.
The stitch width is reduced to 0 mm at an angle of 30°.
'The stitch width is reduced to 0 mm at an angle of 45°.
Touch the zigzag stitch No
22.
This zigzag stitch is sewn
along the right edge of the presser foot.
The stitch width is reduced to 0 mm at an angle of 60°.
Use the
icon to reverse the needle position. The corner
is turned in the other direction.
Save your change by touching
,
the window is then
closed. If you press the foot control, all changes will be
saved but the window remains open, allowing you to make
further changes.
Touch c, the window is closed without any changes
being saved.
Touch ==
to return to the main menu.
The settings that can be altered for stitch No. 22 are the
same as for zigzag stitch No. 3.
Emhrdery /
Circ
Sequenc&
Combirtion
SeIech,r,
b' r,uinher
[,tcFies
Data Mndiger
remains constant; the left-hand position changes.
Touch 'Overcasting'.
40
'.,
OvercastinQ
22 Overcasting
4O
'
+
—
__ %—
I4f
Exception: This stitch cannot be sewn in four sewing
directions.