Move The Design Within The Hoop - Pfaff Creative 2140 Instruction Manual

4 Operate the multi-color touch screen
4-31
On the screen, the most important settings are directly
visible and selectable.
Touch to call up each additional design that you wish to
include in the embroidery combination.
A version of the main menu appears to enable you to call up
each additional design.
Touch
to access the machine's memory. Save the
embroidery combination in the machine's memory or on a
creative memory card.
More options for adjus the embroidery combination are
accessed by touching
Touch to close the window.
A design is normally placed in the center of the hoop. The
position of any design can be adjusted.
Exception: Continuous designs from the machine s
memory.
For instructions on how to perform embroidery please refer
to the Embroidery I card section.
Move the design within the hoop
The design is placed in the center of the embroidery field
(hoop). This position can be adjusted.
Touch kt1 to access more options for adjusting the
embroidery combination.
Use the
icon to open a screen where the embroidery
design or combination can be moved within the hoop,
enlarged and rotated in 5 degree steps.
Use the cursor arrows to move the marked design or
embroidery combination within the hoop.
The numbers at the upper edge of the window show you
how far (in mm) your design is moved from the center of
the hoop.
Save your change by touching the window is then
closed, If you press the foot control, all changes will be
saved but the window remains open, allowing you to make
further changes.
Touch
.
the window is closed, and moved designs
return to their original position.