Issuing Input Selection Commands Learned From A Type A Remote Control; Programming Vc Models - Projector Remote Control Type A - Extron electronics MEDIALINK MLC 52 Series User Manual

Special Applications, cont'd

Issuing input selection commands learned from a type A remote control

The MLC now has four commands each on the PC and Video buttons. When you
press an MLC input button repeatedly, the following occurs:
Using the PC button (RGB):
•
•
•
•
Using the Video button (S-video or composite video):
•
•
•
•
Programming VC models — projector remote control type A
If you are using an MLC 52 IR VC or an MLC 52 RS VC with a type A remote
control, program the buttons as indicated in the illustration below.
VOLUME
Command #1: Video 1 IR Command "A"
Command #2: Video 1 IR Command "B"
Command #1: S-video 2 IR Command "A"
Command #2: S-video 2 IR Command "B"
Programming an MLC 52 VC model with a projector remote control
type A
4-12 MLC 52 Series MediaLink Controllers • Special Applications
First press (memory block #1): The MLC 52 issues command "A" for RGB 1
input selection. The projector switches to its RGB 1 input.
Second press (memory block #2): The MLC 52 issues command "A" for
RGB 2 input selection. The projector switches to its RGB 2 input.
Third press (memory block #3): The MLC 52 issues command "B" for RGB 1
input selection. The projector switches to its RGB 1 input.
Fourth press (memory block #4): The MLC 52 issues command "B" for RGB
2 input selection. The projector switches to its RGB 2 input.
First press (memory block #1): The MLC 52 issues command "A" for
composite video input selection. The projector switches to its video input.
Second press (memory block #2): The MLC 52 issues command "A" for
S-video input selection. The projector switches to its S-video input.
First press (memory block #1): The MLC 52 issues command "B" for
composite video input selection. The projector switches to its video input.
Second press (memory block #2): The MLC 52 issues command "B" for
S-video input selection. The projector switches to its S-video input.
DISPLAY
ON
OFF
PC
VCR
DVD
MLC 52
Command #1: RGB 1 IR Command "A"
Command #2: RGB 1 IR Command "B"
Optional:
Command #1: RGB 2 IR Command "A"
Command #2: RGB 2 IR Command "B"
Label the button button accordingly and
place it in input switch mode.
INPUTS
S-Video RGB1
VIDEO RGB2
SET
POWER
UP
PRG+
PLAY
UP
TIME/ TIME/
LEVEL– DLY/CNT/REAR LEVEL+
REW
PAUSE FF
LEFT RIGHT
STOP
DOWN
PRG–
– +
SKIP/CHAPTER
TV
DIR A
INPUT
+100
REC/
EFFECT PAUSE
ON/OFF
INPUT SELECT
CD TAPE TUNER
1 2 3
PHONO DVD/LD VCR
4 5 6
TV/DBS
7 8 9
0
ENT DISP
TEST
Projector Remote Type A