Oven Use; Extendable Roller Rack - Jenn-Air PRO-STYLE JDRP430 Use & Care Manual

Dual fuel convection ranges
Hide thumbs Also See for PRO-STYLE JDRP430:
Table of Contents

Advertisement

Available languages

Available languages

OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
During oven use, the heating elements will not remain on, but will
cycle on and off throughout
oven operation.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Closed and Engaged Position
B
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire rack with foil
because air must be able to move freely.
To catch spills, place foil on rack below dish. Make sure foil is
at least 1/2"(1.3 cm) larger than the dish and that it is turned
up at the edges.
_
@ 1! S__;
'_s
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door or
bottom.
RACKS
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
A. Extendable roller rack
B. Sfiding sheff
To
1.
2=
Remove the Extendable
Roller Rack:
Slide the rack in completely so that it is closed and engaged
with the sliding shelf.
Using 2 hands, lift up on the front edge of the rack and the
sliding shelf together. Slowly push both to the back wall of the
oven so the front edge of the sliding shelf sits on the rack
guide located on the sides of the oven.
The front edge of the rack and the sliding shelf should be
higher than the back edge.
C
A. Sliding sheff
B. Rack guide
C. Extendable roller rack
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5.0 cm) of space around bakeware and oven walls.
3=
Using 2 hands, lift up the back of the rack and the sliding
shelf so that the back and front are level on the rack guide.
Ext@ndcsb/e l!et"
Icsck
The extendable roller rack allows easy access to position and
remove food in the oven. It can be used in rack positions 1
through 4. The extendable roller rack will not fit in position 5.
Open Position
A. Extendable roller rack
B. Sliding shelf
B
4. Pull the rack and the sliding shelf out.
To Replace Extendable
Roller Rack
1. Using 2 hands, grasp the front of the closed rack and the
sliding shelf. Place the closed rack and the sliding shelf on
the rack guide.
2. Slowly push the rack and the sliding shelf to the back of the
oven until the back edge of the sliding shelf drops.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro-style jdrp436Pro-style jdrp536Pro-style jdrp548

Table of Contents