Fedders 23-23-0321N-002 Installation & Operation Manual page 6

i i ii_ii i
2. WINDOW INSTALLATION
D Plastic foam seal
Ir
Window sill Filler panel
Upper window sash
Lower window sash
5/8" wood screws
9, Secure top of filler panels by driving 5/8"
long wood screws through top mounting
holes into window sash (Fig. 9).
10, Secure bottom of filler panels by driving 5/8"
long screws into window si[[ through filler
pane[ tabs (Fig. 9).
1 1. Cut plastic foam sea[ to width of window
and install between upper and lower window
sash (Fig. 9).
12. Use sealant to fi[[ any minor openings,
Installation in
Minimum Width Window
1. Remove both filler panels from air
conditioner cabinet (Fig. 5),
2. Refer to steps 1 through 7 of preceding
instructions (Pgs. 2 & 3),
3, Close window until it touches behind air
conditioner top bar (Fig. 8),
4. Fasten lower window sash to window
frame (use finishing nails, wood screws,
or "L" brackets) (Fig. 9),
5. If filler is required on sides of air
conditioner, cut plastic foam sea[ to size
and fi[[ both sides,
6. Cut plastic foam sea[ to width of window
and install between upper and lower
window sash (Fig. 9),
7. Use sealant to fi[[ any minor openings,
Consult your authorized dealer or importer for
INSIDE VIEW alternative installation instructions.