Installation - Fedders 23-23-0321N-002 Installation & Operation Manual

2. WINDOW INSTALLATION
Unit & Window Size
1. If your air conditioner cabinet is 20" wide, it will fit window openings 23 7/8" to 39" in width,
Minimum opening height is ] 2 3/4" from bottom of sash to sill, Removal of both filler panels
permits installation in windows with a minimum opening width of 20 1/4", This size unit requires
one support channel (Fig. 3).
2, If your air conditioner cabinet is 23 3/4" wide, it will fit window openings 27 5/8" to 39" in width,
Minimum opening height is ] 6" from bottom of sash to sill, Removal of both filler panels permits
installation in windows with a minimum opening width of 24", This size unit requires two support
channels (Fig. 4).
D OUTSIDE VIEW
Mounting hole B 3/8" threaded holes
Attach Filler Panels
On some models...
1. Attach filler panels to the existing holes in the cabinet using the supplied screws (Fig. 5).
D El
l !
,I I' , mi°
I]
panel
Screws Bottom bar Cabinet
Installation in Normal Width Window
1, Open and mark center line of window. Depending on the size of your unit, attach one support
channel on center line of window or one 8" to the right and one 8" to the left of the center line.
2, Screw leveling bolt in correct 3/8" threaded hole of support channel. Depth of window sill will
determine which 3/8" threaded hole to use (Fig. 6).
Locating hole
Leveling bolt Support chal
3, Place support channel over line on window
sill with end against window sill. Mark win-
dow sill through locating hole A of support
channel (Fig. 6).
4, Move support channel away from window
sill until mounting hole B is over mark on
window sill. Secure support channel by dri-
ving 1" long wood screw through mounting
hole B into window sill (Fig. 6).