Advertisement
Available languages
Available languages
HOW TO START
!
WARNING
Personal
Injury and Product
Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding.
Keep children
away
and provide a clear path when
rewinding
the cord to prevent
personal injury.
DO NOT use outlets above
counters.
Damage from cord to
items in surrounding
area
could occur.
1. Pull cord out of
canister to desired
length.
2. Snap cord into
grip to prevent
accidental
rewinding.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner
has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician to install the prop-
er outlet. Do not change the plug in any
way.
3. Plug the polarized
power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug the cleaner. Hold the
plug while rewinding to prevent damage
or
injury from the moving cord. A slight tug will
release the locking pawls in the cord reel
allowing it to retract.
Pile Height Indicator
Handle
Release
Pedai
Pile Height Pedal
(Some Models)
4. Lower wand from upright position by
pressing on the handle release pedal.
1
CAUTION
DO NOT leave the Power-Mate *
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
5. Select a pile height setting by rotating the
pile height control.
The pile height setting is
shown on the control. See SUGGESTED
PILE HEIGHT SETTINGS.
Attention:
Refer to your carpet manufac-
turers cleaning recommendations.
Some
more delicate carpets may require that they
be vacuumed
with the Power-Mate * agitator
turned off, to prevent carpet damage.
ON/OFF
6. To turn unit on,
step on the
ON/OFF switch.
SOME MODELS
TO turn on Power-
Mate", move the
FLOOR/CARP
ET
switch to the
CARPET
position.
[ FLOOI
I CA_PE
Advertisement
