Kenmore 116.24212 Owner's Manual page 6

Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WANDS
Slide wands
together until
wand button
snaps into place.
Holder_
/ /
POWER-MATE ®
1, Insert wands into Power-Mate" until the
wand buttons snaps into place.
2. Connect Power-
Raised Mate_plug and
cord as shown.
DO NOT force.
. _, Raised area of
plug must be
toward hand.
3. Secure cord into
cord holder on
wand swivel.
To remove: Disconnect cord and step on
wand release pedal, then pull up on wands,
Handle
Handle
6