Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kenmore 116.22512
Summary of Contents for Kenmore 116.22512
- Page 1 Owner's Manual Vacuum Cleaner Model 116,22512 116.22513 CAUTION: Read and follow all safety and operating instructionsbefore first use of this product° Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com Printed in U.S_A. Part No. CO1ZBPKOOUO_-8192043...
- Page 2 Your vacu- um's model and serial numbers are located on the Model and Serial Number Plate, Use the space below to record the model number and serial number of your new Kenmore vacuum, Model No.
- Page 3 WARNIN Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, foltow basic safety pre- cautions including the following: tured hose° The hose contains electrical Read this manual before assembling or using your vacuum cleaner.
- Page 4 It is important to know your vacuum cleaner's parts and features to assure its proper and safe use. Review these before using your cleaner. ;_4-- Cord and Plug Holder Upper Cord and Cord Holder Wand _-- Power.Mate ® Power Cord Wand Swivel Cord Holder Belt...
- Page 5 HOSE ATTACHMENTS Power-Mate Jr,= 3-Way On/Off Switch (Some Models) Off/Bare Floor/Carpet Crevice (Some Models) Toot IL-L-----J Combination Brush Speed Handle Control (Some Models) Floor Brush Handi_Mate Jr.'_ (Some Models) NOTE: All models have one set of attachments in the canister, Some models have an additional set, which can be kept in the accessory...
- Page 6 PACKING LIST on the cover of the separate Repair Parts List. Use this list to verify that you have received all the components your new Kenmore vacuum. WANDS Slide wands together until wand button snaps into place,...
- Page 7 CANISTER Handle 1. Open the canister hood. 2. Check to see that the dust bag is proper- ly in,stalledo See BAG CHANGING instructions, 3. Check to see that the motor safety filter is properly installed,, See MOTOR SAFETY FILTER CLEANING for instructions, HOOD It is normal for the canister hood to come off...
-
Page 8: How To Start
HOW TO START Pile Height Indicator Personal Injury and Product Damage Hazard • DO NOT plug in if switch is in ON position. Personal injury or damage could result. Handle Release • The cord moves rapidly when Pedal rewinding. Keep children away and provide a clear path when 3. - Page 9 Suggested sweeping pattern. Suction Control For best cleaning action, the Power-Mate ® should be pushed straight away from you and pulled straight back, At the end of each pull stroke, the direction of the Power-Mate ® shouid be changed to point into the next section to be cleaned, This pattern should be continued across the rug with slow, glid- ing motions,...
- Page 10 ATTACHMENTS ON WANDS 1, To remove wands from Power- Mate ®, lock wands in straight-up posi- tion_ ATTACHMENTS ON HANDLE NOTE: If the Power-Mate ® is 2. Press wand attached, turn Handle release pedal cleaner off Wand Quick with foot and Button -_ U Release Pedal before removing...
-
Page 11: Overload Protector
PERFORMANCE INDICATOR Activebrushedge cleanersareon both SOME MODELS sidesof the Power- if the performance indi- Mate ® .Guideeither cator turns entirely red sideof the Power- check for a full dust bag, or a clog in the Mate ®alongbase- vacuum. See HOW YOUR VACUUM boardsor nextto WORKS furniture to help... -
Page 12: Bag Changing
Thevacuumcleanercreatessuctionthat picksup dirt,Rapidlymoving air carries the dirt to the dustbagthrough the /S._. airflow passages° The dust bag lets " the air pass through, while it traps ,_.,," t,e dirt For best cleaning results, keep _/" the airflow passage open /**_' Mofor Check the starred areas ,/_y"... -
Page 13: Motor Safety
1. Unplug cord from wall outlet, DO NOT drip water on cleaner. . CAUT,ON 2. Clean exterior using a clean, soft cloth that has been dipped in a solution of mild Do not use attachments ifthey liquid detergent and water, then wrung dry. are wet. - Page 14 Exhaust\'_ _ 2. When the Filter • WARNING exhaust filter Fire and/or Electrical Shock Hazard becomes dirty, remove it by Do not operate with a clogged pulling straight up, exhaust filter or without the exhaust filter or exhaust filter cover installed, EXHAUST FILTER Exhaust 3o Place the new...
- Page 15 1. Remove light 2. Push in and turn Push In cover by pressing And Turn ["_._ bulb counterclock- in and lifting both -._.. wise to remove. sides as shown. _---___t 3. Replace the bulb,, higher than t5 Watts (130V)o Close light Bulb must not be cover until it snaps in places...
-
Page 16: To Remove Belt
TO REMOVE BELT TO REPLACE BELT 1o Remove light cover and light bulb as shown under LIGHT BULB CHANGING, 2. Unscrew the Power- Mate ® cover screws_ 3. Turn Power-Mate ® 1. Slide washers and brush supports onto ever, To brush assembly. - Page 17 TO REPLACE BRUSH DOWEL • _ WARNING ......1. Remove Power-Mate ®cover, belt and brush assembly, See "To Remove Belt" in Electrical Shock Or Personal Injury BELT CHANGING AND BRUSH Hazard CLEANING.. Disconnect electrical supply before 2. Remove brush supports, washers, servicing or cleaning the unit.
- Page 18 Reviewthis charttofind do-it-yourself solutionsforminorperformance problems. Any service needed, o therthanthosedescribed in this owner'smanual,shouldbe performed by a Sears authorized servicerepresentative. WARNING Electrical Shock Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury. Cleanerwon't start.
- Page 19 repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E® Anytime, day or night (1_800-469-4663) (UoS°Ao a nd Canada) www.sears°com www,sears.ca For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the nearest Sears Parts and Repair Center.