Kenmore 911.95579 Owner's Manual page 23

CLEAHRNG MATERIALS
,, Dishwashing detergent
,, Warm water
,, Soft cloth
,_ Monded Rib
Clear
Spring Clip
TO REMOVE
t, Be sure the control knob is in the off
position.
2, Pull straight off the stem.
Using a piece of string can make
removing the knob easier. Slip the string
under and around the knob, pulling
straight out.
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft cloth,
DO NOT let the knob soak.
TO REPLACE
IB
.
a
Check the back of the knob. The
molded rib of the knob is designed
to fit perfectly onto the knob stem.
Align the molded rib to the clear
groove in the knob stem.
Push the knob back as far as it
will go.
_ AUTMON: Disconnect
electricag power to the
oven at the main circuit
breaker or fuse box
before attempting to replace
the oven i_ght bulb. Do not
touch a hot light bulb with wet
hands or a wet cloth, Wait until
the bulb has cooled and use a
dry cloth,
23
Glass
Retainer.
Live
Collar
Bulb j
Glass Cover /
REMOVE THE COVER
Disconnect electrical power to the
oven at the main circuit breaker or
fuse box,
2, Grasp the glass cover and turn 1/4
turn counterclockwise until the tabs
of the glass cover clear the grooves
ol the glass retainer.
REPLACE THE LIIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb.
TO R£PLACE COVI_R
t, Place the tabs of the glass cover into
the grooves of the glass retainer.
2, Turn the glass cover 1/4 turn in the
clockwise direction.
3, Reconnect the electrical power to
the oven.
For improved lighting inside the oven,
clean the glass cover frequently using a
wet cloth. Caution: This should only
be done when the oven is
completely cool.