Pre-Set Quantity Conditions; M+ Operation - Excell Counting Scale User Manual

EXCELL PRECISION CO., LTD

3-3 PRE-SET QUANTITY CONDITIONS

Press Z then
Weight
Press 0 or
0 = The quantity will be accepted by the scale only when the weight is stable.
1 = The quantity will be accepted by the scale even if the weight is un-stable.
To exit and save the entry, press the

3-4 M+ OPERATION

Press Z then
Weight
Press 0 or
0 = M+ will be operate when the weight is stable.
1 = M+ will be operate even when the weight is un-stable.
To exit and save the entry, press the
Counting
1 followed by 3
Unit Weight
.
1 to select the required mode
1 followed by 4
Unit Weight
1 to select the required mode
22
.
•
key
•
key
Quantity
X
Quantity
X
ZSME200000003