Chapter 2 Operation; Switch Scale On; Switch Scale Off; Display Backlight - Excell Counting Scale User Manual

EXCELL PRECISION CO., LTD

CHAPTER 2 OPERATION

2-1 SWITCH SCALE ON

To switch on the scale, ensure that the weigh pan is empty and press the ON/OFF
switch towards the ("
weighing or counting operations.
4
If the scale has a RS232 option fitted, the interface card number will be displayed
during the power up sequence.

2-2 SWITCH SCALE OFF

To switch the scale off, press the ON/OFF switch towards the ( " ¡ ") position.

2-3 DISPLAY BACKLIGHT

AUTO BACKLIGHT
Press Z key, the unit weight displays
When the weight is over 10 divisions or any key is pressed, the display backlight
will be switched on. When the weight returns to zero or the weight on platform is
less than 10 divisions, the display backlight will switch off after 5 seconds.
BACKLIGHT ON
Press Z key, the unit weight displays
Backlight is on all the time.
BACKLIGHT OFF
Press Z key, the unit weight displays
Backlight is off.
4
The backlight mode is stored in memory and will restored when the scale is
switched off and back on again.
Counting
") position and the scale will power on and set zero ready for
|
.
10
followed by pressing
followed by pressing 4
followed be pressing
ZSME200000003
5
6