JVC CA-FSH300 Instructions Manual page 51

Recording Discs
To stop recording [br a moment, press REC.
mDise Synchronized aecerding B(,_J-, theCD
playback
and
tape recording are
paused. To resume recordh_g, press TAPE <3 E>.
You can staJ_t disc play and recording at file same time.
On the unit ONLY:
Put a recordable cassette in with the exposed
part of the tape down.
° See also page 14.
To stop recording, press 1
The recording stops and file CD playback ..............
is paused.
2 Close the cassette holder gently.
Torecord on bothsides--Reverse N0de
3 Press CD c>/H to select the CD
player as the source.
4[ Press [] to stop the disc
playback.
• You can make a program (see page
I 1) if you wahl
.... :21;i,
On the remote control ONLY:
Press RE¥.MODE (reverse mode) .......
c__) _s ht.
repeatedly until T-_ or _ " "
• When using fl_e Reverse Mode for Disc
Synchronized Recording, _-) Bights up and the
recording staJ_ts h_ the forward ( _ ) dh:ectkm first. When
[he [ape reaches its end, d_e CD playback is paused until
the {ape recording changes to the reverse dh:ection, {hen the
5 Press REC (recording),
f_ indicator Bights up on the display.
REC
J J_ f-J4-J .D
. =,
!
U U'U
23
{7 Press TAPE <_ c>.
"SYNC REC" appears and _ indicator starts
flasNng slowly on the display.
CD playback and tape recording starts
To caned the Reverse Mode, press REV.MODE repeatedly
until _ " "
IS hi.
When making Sleep Timer settings while doing Disc
Synchronized Recording
Set enough time to allow for the disc to finish playing; otherwise,
the power will go off before recording is completed.
REC
r _/ t_ i I-- !__ L--_t--
!\ C.- L
n tVl_
o if no cassette is inserted when you press REC
"NO TAPE" appears on the display.
o if a protected tape is inserted when yon press REC
"PROTECT" appears on the display.
18