JVC CA-FSH300 Instructions Manual page 39

connections have been made. Continued
Unpackin_ Connecting Speakers
After unpacking, check to be sure that you have all the
R_llowing items.
The number in parentheses indica/es the quanti D, of each
piece supplied.
• AM loop antenna (1)
• Remote cenm)l (1)
• Batteries (2)
If any item is missh_g, consult your dealer immediately.
Connecting AN aml FN Antennas
1 AM loop antenna
, (supplied)
\
You can com_ect d_e speakers using the speaker cords.
G
Red
Speaker
cord
Black
Red
Black
Speaker
cord
Right speaker Left speaker
1 Connect the supplied AM loop antenna to the
AM LOOP terminal.
Place the antemm away from the tunit and adjust its
position for the best reception.
2 Adjust the position f_r the FM antenna fbr
the best reception.
_For better reception of both FM and AM
Make sure the antenna conductors do not touch any other
terlni_mls or com_ecth_g cords.
, Keep the amem_as away from metallic parts of the m_it,
conl_ecting cords, and the AC power cord.
1 Hold the clamp of the speaker terminal°
2 Insert the end of the speaker cord into the
terminal
Match d_e polarity of dle speaker termhmls: red cord te
@ and black cord to @.
3 Release your finger from the clamp°
INPORTANIr:
, Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the unit.
, DO NOT connect more than one speaker to one
speaker terminal.