Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for JVC FS-H300UJ
Summary of Contents for JVC FS-H300UJ
- Page 1 COMPACT COMPONENT SYSTEM FS-H300 –Consists of CA-FSH300 and SP-FSH300 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bot- tom or side of the cabinet. Retain this information for future reference. Model No.
- Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
- Page 3 For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM...
- Page 4 Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual About This Manual This manual is organized as follows: •...
-
Page 5: Table Of Contents
Contents Location of the Buttons and Controls ... 3 Main Unit ... 3 Remote Control ... 5 Getting Started ... 6 Unpacking ... 6 Connecting AM and FM Antennas ... 6 Connecting Speakers ... 6 Connecting Other Equipment ... 7 Putting the Batteries into the Remote Control ... -
Page 6: Location Of The Buttons And Controls
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view Front view COMPACT DIGITAL AUDIO D A I L Y T I M E R / S N O O Z E STANDBY VOLUME –... - Page 7 Display window DAILY 123 ALL GR. See pages in parentheses for details. Main unit 1 Disc cover (10) 2 ) OPEN (disc cover open) (10) 3 DAILY TIMER/SNOOZE button (20) 4 Remote sensor (5) 5 STANDBY lamp (8) (STANDBY/ON) button (8) 7 Source buttons •...
-
Page 8: Remote Control
Remote Control See pages in parentheses for details. STANDBY/ON DISPLAY FM MODE SLEEP CLOCK /TIMER CANCEL TAPE FM/AM RANDOM PROGRAM REPEAT PRESET GROUP DOWN PRESET GROUP SOUND/HBS BEAT CUT REV.MODE FADE MUTING RM-SFS H300J R EMOTE CONTROL 1 STANDBY/ON 2 SLEEP button (21) 3 CLOCK/TIMER button (8, 19) 4 SET button (8, 15, 19, 20) 5 CANCEL button (19, 20) -
Page 9: Getting Started
Getting Started Unpacking After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Connecting AM and FM Antennas AM loop antenna (supplied) -
Page 10: Connecting Other Equipment
To remove the speaker grilles The speaker grilles are removable as the illustration below. Holes To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you while holding the side. Do the same for the rest of projections one at a time. -
Page 11: Common Operations
Common Operations Setting the Clock Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “AM 12:00” starts flashing on the display. You can set the clock when the unit is either turned on or in standby mode. -
Page 12: Selecting The Source
Selecting the Source To select the source, press CD 6, TAPE 2 3, FM/AM, or AUX. • When you select CD as the source, playback starts automatically. To operate the CD player, see pages 10 to 13. To operate the tape deck, see page 14. To operate the tuner (FM or AM), see pages 15 and 16. -
Page 13: Playing Back Discs
Playing Back Discs This unit has been designed to play back the following discs—CD, CD-R, and CD-RW. You can play back the discs containing the tracks in music CD format or MP3 files in ISO 9660 format. • In this instruction, we call a disc recorded MP3 files “MP3 disc,”... -
Page 14: Basic Disc Operations
To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’s pivot lightly. • If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. -
Page 15: Repeating Tracks-Repeat Play
Repeat step 3 to program other tracks you want. Press CD 3/8. The tracks are played in the order you have programed. If you try to program a 41st track “– – FULL – –” will appear on the display. To stop playing, press 7. -
Page 16: Playing At Random-Random Play
Playing at Random—Random Play You can play the tracks at random. On the remote control ONLY: Press RANDOM. The RANDOM indicator lights up on the display. RANDOM To exit from Random Play, press 7 or RANDOM. The RANDOM indicator goes off. •... -
Page 17: Playing Back Tapes
Playing Back Tapes Playing Back a Tape You can play back type I tapes only. Press PUSH OPEN. The cassette holder opens. Put a cassette in with the exposed part of the tape down. Close the cassette holder gently. • When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display. -
Page 18: Listening To Fm And Am Broadcasts
Listening to FM and AM Broadcasts Tuning in to a Station Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. -
Page 19: Tuning In To A Preset Station
Tuning in to a Preset Station On the remote control ONLY: Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. -
Page 20: Recording
Recording IMPORTANT: • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. -
Page 21: Recording Discs-Disc Synchronized Recording
Recording Discs —Disc Synchronized Recording You can start disc play and recording at the same time. On the unit ONLY: Put a recordable cassette in with the exposed part of the tape down. • See also page 14. Close the cassette holder gently. Press CD ‹/8 to select the CD player as the source. -
Page 22: Using The Timers
Using the Timers There are four timers available—Daily Timer, Recording Timer, Snooze Timer, and Sleep Timer. • Before using these timers, make sure the built-in clock is set correctly (see page 8). Using Daily Timer and Recording Timer You can set the timer whether the unit is on or off. How the Timer actually works When the on-time comes, the unit automatically turns on (the [timer] indicator flashes and continues flashing while the... -
Page 23: Using Snooze Timer
For the Recording Timer ONLY: Set the off-time you want the unit to turn off. (1) Press UP or DOWN to set the hour, then press SET. (2) Press UP or DOWN to set the minute, then press SET. If you want to change the time setting, press CANCEL. -
Page 24: Using Sleep Timer
Using Sleep Timer With Sleep Timer, you can fall asleep to your favorite music or radio program. • You can set Sleep Timer only when the unit is turned on. • You can also turn off the unit automatically by using Auto Standby. -
Page 25: Maintenance
Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. -
Page 26: Troubleshooting
Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service. -
Page 27: Specifications
Specifications Amplifier Section—CA-FSH300 Output Power: 20 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. Audio input sensitivity/Impedance (at 1 kHz) Speakers Impedance: Tuner FM tuning range: AM tuning range: CD player Dynamic range: Signal-to-noise ratio:... - Page 28 If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number.
- Page 29 To prevent electrical shock,do not open the cabinet.There are no user serviceable parts inside.Please refer to qualified service personnel for repairs. Accessories To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or on the web at www.JVC.com BT-51001-5 (0301) ®...
- Page 30 VICTOR COMPANY OF JAPAN, LIMITED 0304AIMMDWORI © 2004 VICTOR COMPANY OF JAPAN, LIMITED...
- Page 31 COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT FS-H350 FS-H300 INSTRUCTIONS MANUEL D’INSTRUCTIONS –Consists of CA-FSH350 and SP-FSH350 –Consists of CA-FSH300 and SP-FSH300 LVT1193-002A...
- Page 32 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
- Page 33 For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM...
- Page 34 Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual About This Manual This manual is organized as follows: •...
- Page 35 Contents Location of the Buttons and Controls ... 3 Main Unit ... 3 Remote Control ... 5 Getting Started ... 6 Unpacking ... 6 Connecting AM and FM Antennas ... 6 Connecting Speakers ... 6 Connecting Other Equipment ... 7 Putting the Batteries into the Remote Control ...
-
Page 36: Location Of The Buttons And Controls
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view Front view COMPACT DIGITAL AUDIO D A I L Y T I M E R / S N O O Z E DIGITAL AUDIO STANDBY VOLUME... - Page 37 Display window DAILY 123 ALL GR. See pages in parentheses for details. Main unit 1 Disc cover (10) 2 ) OPEN (disc cover open) (10) 3 DAILY TIMER/SNOOZE button (20) 4 Remote sensor (5) 5 STANDBY lamp (8) (STANDBY/ON) button (8) 7 Source buttons •...
-
Page 38: Remote Control
Remote Control See pages in parentheses for details. STANDBY/ON DISPLAY FM MODE A. STANDBY SLEEP CLOCK /TIMER CANCEL TAPE FM/AM RANDOM PROGRAM REPEAT PRESET GROUP VOLUME DOWN PRESET GROUP SOUND/HBS BEAT CUT REV.MODE FADE MUTING 1 STANDBY/ON 2 SLEEP button (21) 3 CLOCK/TIMER button (8, 19) 4 SET button (8, 15, 19, 20) 5 CANCEL button (19, 20) -
Page 39: Getting Started
Getting Started Unpacking After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Connecting AM and FM Antennas AM loop antenna (supplied) -
Page 40: Connecting Other Equipment
To remove the speaker grilles The speaker grilles are removable as the illustration below. Projections Holes To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you while holding the side. Do the same for the rest of projections one at a time. -
Page 41: Common Operations
Common Operations Setting the Clock Before operating the unit any further, first set the unit’s clock. When you plug in the power cord, “AM 12:00” starts flashing on the display. You can set the clock when the unit is either turned on or in standby mode. -
Page 42: Selecting The Source
Selecting the Source To select the source, press CD 6, TAPE 2 3, FM/AM, or AUX. • When you select CD as the source, playback starts automatically. To operate the CD player, see pages 10 to 13. To operate the tape deck, see page 14. To operate the tuner (FM or AM), see pages 15 and 16. -
Page 43: Playing Back Discs
Playing Back Discs This unit has been designed to play back the following discs—CD, CD-R, and CD-RW. You can play back the discs containing the tracks in music CD format or MP3 files in ISO 9660 format. • In this instruction, we call a disc recorded MP3 files “MP3 disc,”... -
Page 44: Basic Disc Operations
To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’s pivot lightly. • If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. -
Page 45: Repeating Tracks-Repeat Play
Repeat step 3 to program other tracks you want. Press CD 3/8. The tracks are played in the order you have programed. If you try to program a 41st track “– – FULL – –” will appear on the display. To stop playing, press 7. -
Page 46: Playing At Random-Random Play
Playing at Random—Random Play You can play the tracks at random. On the remote control ONLY: Press RANDOM. The RANDOM indicator lights up on the display. RANDOM To exit from Random Play, press 7 or RANDOM. The RANDOM indicator goes off. •... -
Page 47: Playing Back Tapes
Playing Back Tapes Playing Back a Tape You can play back type I tapes only. Press PUSH OPEN. The cassette holder opens. Put a cassette in with the exposed part of the tape down. Close the cassette holder gently. • When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display. -
Page 48: Listening To Fm And Am Broadcasts
Listening to FM and AM Broadcasts Tuning in to a Station Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. -
Page 49: Tuning In To A Preset Station
Tuning in to a Preset Station On the remote control ONLY: Press FM/AM to select either “FM” or “AM.” The unit automatically turns on and tunes in to the previously received station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. -
Page 50: Recording
Recording IMPORTANT: • It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. • The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. -
Page 51: Recording Discs-Disc Synchronized Recording
Recording Discs —Disc Synchronized Recording You can start disc play and recording at the same time. On the unit ONLY: Put a recordable cassette in with the exposed part of the tape down. • See also page 14. Close the cassette holder gently. Press CD ‹/8 to select the CD player as the source. -
Page 52: Using The Timers
Using the Timers There are four timers available—Daily Timer, Recording Timer, Snooze Timer, and Sleep Timer. • Before using these timers, make sure the built-in clock is set correctly (see page 8). Using Daily Timer and Recording Timer You can set the timer whether the unit is on or off. How the Timer actually works When the on-time comes, the unit automatically turns on (the [timer] indicator flashes and continues flashing while the... -
Page 53: Using Snooze Timer
For the Recording Timer ONLY: Set the off-time you want the unit to turn off. (1) Press UP or DOWN to set the hour, then press SET. (2) Press UP or DOWN to set the minute, then press SET. If you want to change the time setting, press CANCEL. -
Page 54: Using Sleep Timer
Using Sleep Timer With Sleep Timer, you can fall asleep to your favorite music or radio program. • You can set Sleep Timer only when the unit is turned on. • You can also turn off the unit automatically by using Auto Standby. -
Page 55: Maintenance
Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will have the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. -
Page 56: Troubleshooting
Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service. -
Page 57: Specifications
Specifications Amplifier Section Output Power: 20 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. Audio input sensitivity/Impedance (at 1 kHz) Speakers Impedance: Tuner FM tuning range: AM tuning range: CD player Dynamic range: Signal-to-noise ratio:... - Page 58 VICTOR COMPANY OF JAPAN, LIMITED EN, FR 0304AIMMDWORI © 2004 VICTOR COMPANY OF JAPAN, LIMITED...