JVC CA-FSH300 Instructions Manual page 44

To remove the disc, press _ ()PEN en the unit, then take out
die disc by belling it at die edges while pressing the uni£s
o if the disc cannot be read correctly (because it is scratched,
fin" e×ample) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
o If no disc is inserted
'NO D1SC" appears on the display.
DO NOT open the disc cover by hand as it wiil be I
damaged,
M
Basic [?isc 0perati0ns
While playing a disc, you can do the R>HewMg operations.
To st0p playing far a m0ment
During play, press CD _/|l.
W]file pausing, current track number and elapsed
playing dine flash en die display.
To resume playing, press CD _/H again.
To ge le anether track directly using lhe number
bultens
On the remote control ONLY:
Pressing tile number butten(s} beR>re or
during play allews you to start playing tile
track number you wahl
Ex.: For hack number 5, press 5.
For track number 15, press OVER, C)
allen press l, 5.
For track number 20, press OVER,
then press 2, 0.
(For MP3 disc eniy)
For track number 20, press OVER, dlen
press 0, 2, 0.
For hack number 156, press OVER, then press l, 5, 6.
© © @
® @ @
® @
OVER
@ 0
Toleeale a particularpointin a Iraek
During play, press and hold _1 or 1_4 (or
UP _1 or DOWN _4 en die unit).
• _1 (UP _1): Fastqbrwards file
tracks.
• I_ (DOWN I_): Fast-reverses file
tracks.
While playing back an MP3 disc
This function is not available.
Pm_rammin_ the Track Playin_ 0r_er
_Pm_ram Play
You can arrange die order in wMch hacks play before you
start playMg. You can program up to 40 tracks.
On the remote control ONLY:
I Place
a disc.
• If the current source is net the CD player, press
CD _/11, then 1_ before going to die next step.
•2 Press PROGRAM. _ .....
The PRGM (program) mdicater appears on the
U r "U t
PRGM
3 Press
_l or [_ to select the
track number, then press
PROGRAM.
Track number
!
Program step
number
o%
pROGRAM
PRGM
You can abe use the number
butten(s) C)
te select a track number,
* For the operation ef the number @
butt(ms, see To go to another
track
directly using die number buttons" C)
on the left column.
When yon are programming from MP3 disc
Pressing PRESET GROUP ^ or PRESET GROUP V
........ s elects the firs_ track of each group.
© @
(9 (9
@ @
OVSR
© ©
11