JVC CA-FSH300 Instructions Manual page 22

Usin e Timers
There are four timers avaflaNe--Daily Timer. Recording
Timer. Snooze Timer, and Sleep Timer.
* Berbre usil_g these thners+ make sure the built-in dock is
set correctly (see pate 8)+
Using DailyTimeraml Recording Time
You can set the timer whether the unit is on or off.
Hew the Timer actually werks
\Xdlen the on-time comes, the unit automatically turns on (the
E) [fimerl h_dicator flashes and continues flashing while the
timer is operating). Then, when tl_e off-time comes, the unit
automatically turns off (standby). The timer setting remah_s
in memory unti_ you change it.
• When the E) (timer) and DAILY 1,2+ or 3 indicators are lit
on the display, the timer acts as the f)aHy Timm: Once the
timer has been set, it will be activated at the same thne and
automatically turns off (standby) after 60 mhmtes everyday
until the thner is deactivated.
• When the _) (timer) and the REC indicators are lit on the
display, the thner acts as the Recording Timel: After the
timer-recording finishes, tile details of the setting remain
stored but the timer is turned off+
Befereyoustart...
When ush_g TUNER" as the source to play, make sure to
select the desired station before turning off the powm:
* There is a time _inlit hi doing the fbl]owh_g steps. If the
setting is canceled before you finish, start agah_ from step 1.
On the remote control ONLY:
I Press CLOCK/TIMER repeatedly to .....+,.+o
select the timer you want to adjust
and activate--Daily 1, Daily 2, Daily
3, or Rec.
The timer setting and hour indication start flashing on the
Each time you press the button, the dispk U changes as
follows:
!)_%_ ..................... _+ _i+: ¸
...... DAILY I 4_7 ........
DNly 1 Timer
DNly 2 Timer
/q ! I
.... !'!_!/_j
,i : __i! _ +i!il
Daily 3 Timer
!/-3"lJ L!
iF i!+! ¸ iii:i ¸'i:ili :¸i!¸¸ + i;!! !i ¸ ¸¸¸ ++i+ii ;i + :+¸ +:!{i:; ¸ii+ ¸ +:i:+
/
Rec Timer
+
Clock setting
Normal indication
2 Set_the on:time you want the unit to turn on+
(]) Press UP or DOWN
to set the hour, _ .........
then press SET+
(2) Press UP or DOWN to set me r++l+,+u+e,
tile,+ press SET.
If you want to change the thne
setting, press CANCEL.
* If you am setting fl_e DaiN Time1: the
source name stmls flashing on the dispk U. +_+
_* Go to step 4+
+ [f_ou are setting the Recording Timer,
the OFF indicav)r and hour indication start
flashing (m the display.
19