Horizon Fitness Endurance Series Owner's Manual page 7

POWER
The console on your endurance 200 is powered by 2 AA batteries, which are
replaceable through the back side of the console. Your elliptical itself, is pow-
ered by you.
Your programmable endurance 300 elliptical trainer is powered by a power sup-
ply. The power supply must be plugged into the power jack, which is located in
the front of the machine near the front foot tube.
LEVELING
The elliptical trainer should be leveJ for optimum use. Once you have pJaced the
elliptical trainer where you intend to use it, raise or lower the adjustable levelers
located on the outside of each pedal arm. Once you have leveled the etJiptical train-
er, lock the levelers in place by tightening the wing nuts against the frame.