Horizon Fitness Endurance Series Owner's Manual page 27

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticaIs so lubrication is not needed. The
most important maintenance step is to simply wipe your perspiration off the train-
er after each use.
HOW DO I CLEAN MY HORIZON FITNESS
ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness elliptical trainer and its operating environment
wiII keep maintenance problems and service cans to a minimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule
be followed.
AFTER EACH USE (DAILY)
Turn off the elIiptical trainer with the on/off switch, and unplug the power cord
from the walI outlet.
WARNING!
To remove power from the elliptical, the power cord must be disconnected from
the wail outlet. (Endurance 300 only)
• Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they
can cause damage to the elliptical.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the elliptical trainer or in any other
area where it can become pinched or cut.
EVERY WEEK
Clean underneath the elliptical, following these steps:
• Turn off the elIiptical trainer with the on/off switch.
• Then unplug the power cord at the wal! outlet. (Endurance 300 only)
• Move the elliptical trainer to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the elliptical.
• Return the elliptical trainer to its previous position.
EVER Y MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.