Table of Contents
Advertisement
Installing and Configuring the EVGA nForce 680i SLI Motherboard
MAC Config
Press
Enter
to display the MAC Config menu.
MAC0 LAN
MAC1 LAN
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to
disable their functions.
IEEE1394 controller
This function on the Integrated Peripherals menu allows you to enable or
disable the IEEE1394 (Firewire) interface.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or
disable the high-definition audio function.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select
the optimal number of block read/writes per sector the drive can support.
Select
[Disabled]
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or
disable the onboard FDC controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the
onboard serial port 1 function. Options are
,
[3E8/IRQ4]
[Auto]
58
[Enabled]
[Disabled]
[Enabled]
if your drive does not support block mode.
[3F8/IRQ4]
, and
[Disabled].
or
Auto
to automatically detect
,
,
[2E8/IRQ3]
Advertisement
Table of Contents
