Frequency Settings - EVGA nForce 122-CK-NF68-XX User Manual

Installing and Configuring the EVGA nForce 680i SLI Motherboard

Frequency Settings

CPU Freq, MHz
This value is set by the CPU Multiplier (value cannot be changed by the
user).
FSB Reference Clock. MHz
This value is set by the system (value cannot be changed by the user). To
change the SLI-Ready memory, FSB memory, and memory timing, go to the
FSB & Memory screen.
CPU Multiplier
This value changes the CPU Frequency value depending on the value you
choose. Use the
The options are from 6 X through 60 X.
PCIe 16_1, MHz
x
Use the
Page Up
options for the PCI Express Bus, Slot 1 (the black slot closest to the CPU).
Note that as you go higher in value,
disabled and cannot be changed from this status.
PCIe 16_3, MHz
x
Use the
Page Up
options for the PCI Express Bus, Slot 3 (the blue slot in the middle).
PCIe 16_2, MHz
x
Use the
Page Up
options for the PCI Express Bus, Slot 3 (the black slot farthest from the
CPU). Note that as you go higher in value,
disabled and cannot be changed from this status.
SPP< >MCP Ref Clock, MHz
—
Use the
Page Up
options for the reference clock between the SPP chip and the MCP chip.
Note that as you go higher in value,
cannot be changed from this status.
44
and keys to scroll through the options.
Page Up Page Down
and keys to scroll through the frequency
Page Down
PCIe Spread Spectrum(SPP)
and keys to scroll through the frequency
Page Down
and keys to scroll through the frequency
Page Down
PCIe Spread Spectrum(MCP)
and keys to scroll through the frequency
Page Down
HT Spread Spectrum
is
is
is disabled and