GE JGBS04 Owner's Manual & Installation Instructions page 40

[]
[]
Installation Instructions
LIGHT THE PILOTS [cont.)
Check Ignition of Surface Burners
Operation of all cooktop and oven burners should
be checked after pilots have been lighted (on
some models] and the range and gas supply
lines have been carefullg Checkedfor leaks.
Standing Pilot Models
Select a top burner knob and simUltaneouSly
push in and turn to HI position. The burner should
light within a few seconds. Try each burner in
succession until al! burners have been checked.
Electric Ignition Models
Select.a top burner knob and simukaneouslg push
in and turn to UTE position. You will hear a clicking
sound indicating proper operation of the spark
module. Once the air has been purged from the
supply lines, burnersshould light within 4 seconds.
After burner lights: rotate knob out of the LITE
position, Try each burner in succession until all
burners have been checked.
Quality of Flames
The combustion quality of burner flames needs
to be determined visually.
_] A) Yellow flames.
Call for service
(B)Yellow tips on
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flames look like [A),call for service.
Normal burner flames should look like {B) or (C),
depending on the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
[] Replace Oven Parts
After all adjustments are made, replace
the broiler drawer, oven bottom, racks and
oven door.
40