GE JGBS04 Owner's Manual & Installation Instructions page 22

Ang spillOnor around an electrodemust
be carefullg cleaned.Takecare to not hit
an electrode with angthing hard or it could
be damaged.
You should clean the burner caps and .
burner headsroutinetg,especiallgafter bad
spillovers,which couldclog.the openings
in the burlier heads. Liftoff when cool,
To remove bumed-on food, soak the burner
heads in a solution of mild liquid detergent
and hot water for 20-30 minutes. Formore
stubborn stains,use a toothbrush.
After cleaning
Beforeputting the burner caps and heads
back,shake out excesswater and then drg
them thoroughlg bg setting in a warm oven
for 30 minutes.
NOTE: Do not usesteelwool or scouring
powders to cleon the burners.
Replacethe matching size caps onto the
heads.Thereisone small,two medium and
one largecap. Sizesare stamped into the
bottom of the caps.
iii:ii: !÷.
Makesure that the headsand caps are
replacedin the correct locations.
NOTE: O n some models,the burnersare all
the samesizeand power.
22