Table of Contents
Advertisement
Service &
Troubleshooting
Guide 'Home
Generator
Systems
_4_'ggs
_ s_o_o.
Model 1938 (I 0kW) Generator
_
_:_'_'_'_'_
Fuel Line From
Regulator
Removal
The fuel line passes through a hole in the bulkhead and
connects to a fitting on top of the regulator, as shown in
figure 48A & B.
• Loosen the clamp that secures the hose to the fitting.
• Disconnect
the hose, cover end to prevent dirt
ingestion and position
out of the way.
• Remove the deflector that is mounted on the upper
portion
of the muffler box (Figure 49).
• Remove the five screws that secure the upper portion
of the muffler box to the alternator
bulkhead.
• Remove the scews that hold the upper portion
of the
muffler box to the lower portion
(Figure 5 I).
• Slide the upper portion
of the muffler box out of the
end of the enclosure.
• Remove the three remaining screws that secure the
lower portion
of the muffler box to the bulkhead and
set the bottom
of the muffler box aside.
The muffler box is a two piece assembly that is secured to
the bulkhead with five self-tapping sheet metal screws
(Figure 50).
47
Advertisement
Table of Contents
