Table of Contents
Advertisement
Reference value < RTM parameter
Value of
effect parameter
set by RTM
Reference value
RP01
To switch the on/off state of pedal wah/pedal pitch shift, use the control pedal
5
STEP
push-down switch or the foot switch of the RP01.
If the PEDAL parameter of the WAH module or the P-PIT parameter of
the EFFECT module is selected for the current patch, the control pedal
push-down switch or the foot switch of the RP01 can be used to toggle
the ON/OFF state. The Status LED lights up accordingly.
To return the pedal wah/pedal pitch shifter to the original state, press the control
6
STEP
pedal push-down switch or foot switch once more.
The Status LED goes out.
Status LED: Out
PEDAL (WAH module): On
P-PITCH (EFFECT module): Off
Control pedal push-down switch or
PEDAL (WAH module): Off
P-PITCH (EFFECT module): On
• When the Effect Monitor LED for pedal wah/pedal pitch shifter
HINT
HINT
is out (effect type PEDAL/P-PITCH is not selected in respective
module), the control pedal push-down switch and the foot switch
have no effect.
• Any change in the pedal wah/pedal pitch shifter on/off setting
and the RTM parameter is only temporary. When another patch
is selected, the settings of the new patch will become active.
ADVANCED BASS EFFECTS PROCESSOR
Reference value
STATUS
MONITOR
PEDAL-WAH
ON/OFF(PEDAL SW)
PEDAL-PITCH
ON/OFF(PEDAL SW)
foot switch pressed
Status LED: Lit
STATUS
MONITOR
PEDAL-WAH
ON/OFF(PEDAL SW)
PEDAL-PITCH
ON/OFF(PEDAL SW)
Reference value > RTM parameter
Value of
effect parameter
set by RTM
RP01
37
Advertisement
Table of Contents
