Zoom Player 3000B Operation Manual page 26

2: MANUAL
Toggles between Manual mode (in which Foot Switches 1 - 4 can be
used to individually switch modules on and off) and regular Play
mode. For information on Manual mode, please refer to page 23.
This mode is useful when modules are to be switched on and off
during a performance.
3: HOLD DLY (LONG)
4: HOLD DLY (REAL)
Controls the hold delay feature (page 24) for recording and playing a
phrase during a performance. In the HOLD DLY (LONG) mode,
maximum recording time is 6 seconds. In the HOLD DLY (REAL)
mode, maximum recording time is 3 seconds, with higher sound
quality.
5: DELAY (TAP)
Allows tap input of the delay time for the hold delay feature (page
26). Useful for controlling the delay time according to the tempo of a
song.
6: SYNTH HOLD
In this mode, the sound produced by the SYNTH module is held
constant for as long as the FUNCTION switch is pressed. Pressing
the FUNCTION switch once more releases the hold mode.
7: BYPASS
8: MUTE
Toggles the Bypass state or Mute state on and off. When one of
these FUNCTION switch modes is selected, the Foot Switches 1 - 4
cannot be used to control the Bypass state (page 9) or Mute state
(page 10). This is to prevent inadvertent activation of Bypass or
Mute during a performance.
9: RTM
Controls a selected effect parameter or the volume in real time. For
details, please refer to page 27.
5
Press the EDIT key once more.
STEP
The 3000B returns to the Play mode.
FUNCTION Mode is a global parameter whose setting does not
NOTE
change when a different patch is selected. If not stored, the setting
reverts to the previous value when the unit is turned off and then on
again. When wishing to store the setting, select any patch in the
USER group and store it as described on page 19.
22
EDIT ( CANCEL )
ADVANCED BASS EFFECTS PROCESSOR