Cabinet Module; Mod/Efx2 Module - Zoom G7.1ut Operation Manual

Effect Types and Parameters

CABINET module

This effect simulates the sound obtained when recording an amp cabinet with a
microphone. The simulated mic type and position can be selected. The on/off status of this
module controls the automatic algorithm selection in the PRE-AMP module (→ p. 51).
PARM1 PARM2
Dyna,
Mic Type Mic Posi
0 – 2
Cond
Lets you select different
characteristics according to the
mic position. The following
Selects the microphone type.
settings are available.
"Dyna" simulates the
0: Mic pointed at speaker
frequency response of a
center
dynamic mic and "Cond" that
1: Mic pointed halfway
of a condenser mic.
between speaker edge and
center
2: Mic pointed at speaker edge

MOD/EFX2 module

This module comprises modulation effects such as chorus and flanger, delay effects, and
pitch shifter effects.
Chorus
This effect mixes a variable pitch-shifted component to the original signal, resulting in full-bodied resonating sound.
PARM1 PARM2
Depth
0 – 100 Rate 1 – 50
Adjusts the effect depth. Adjusts the modulation rate.
ST-Chorus
This is a clear sounding stereo chorus.
PARM1 PARM2
Depth 0 – 100 Rate 1 – 50
Adjusts the effect depth. Adjusts the modulation rate.
Ensemble
This is a chorus ensemble with three-dimensional movement.
PARM1 PARM2
Depth Rate
0 – 100 1 – 50
Adjusts the effect depth. Adjusts the modulation rate.
Flanger
This effect produces a resonating and strongly undulating sound.
PARM1 PARM2
Depth Rate
0 – 100 0 – 50
Adjusts the effect depth. Adjusts the modulation rate.
60
PARM3
Depth
0 – 2
Adjusts the effect depth
PARM3 PARM4
Tone
0 – 10 Mix 0 – 100
Adjusts the level of the effect
Adjusts the tonal quality of the
sound mixed to the original
sound.
sound.
PARM3 PARM4
Tone
0 – 10 Mix 0 – 100
Adjusts the level of the effect
Adjusts the tonal quality of the
sound mixed to the original
sound.
sound.
PARM3 PARM4
Tone
Mix
0 – 10 0 – 100
Adjusts the level of the effect
Adjusts the tonal quality of the
sound mixed to the original
sound.
sound.
PARM3 PARM4
Resonance -10 – -1, 0,
Manual
0 – 100
1 – 10
Adjusts the resonance Adjusts the frequency range
intensity. on which the effect operates.
ZOOM G7.1ut
Pitch Shift
This effect shifts the pitch up or down.
PARM1 PARM2
-12 – -1, 0,
Shift Tone
0 – 10
1 – 12, 24
Sets the pitch shift amount in Adjusts the tonal quality of the
semitones. sound.
Pedal Pitch
This effect allows using a pedal to shift the pitch in real time.
PARM1 PARM2
Color Mode Up, Down Tone
1 – 8
Selects the type of pitch
Sets the direction of the pitch
change caused by the pedal
change to Up or Down.
(see Table 1).
[Table 1]
Pedal minimum value
Color Mode Pedal maximum value
Up -100 cent Original sound only
1
Down
Original sound only -100 cent
Up
DOUBLING Detune + DRY
2
Down
Detune + DRY DOUBLING
Up 0 cent +1 octave
3
Down +1 octave 0 cent
Up 0 cent -2 octaves
4
Down -2 octaves 0 cent
Vibe
This is an effect with automatic vibrato.
PARM1 PARM2
Depth 0 – 100 Rate
0 – 50
Adjusts the effect depth. Adjusts the modulation rate.
Step
Special effect that changes the sound in a staircase pattern.
PARM1 PARM2
Depth 0 – 100 Rate
0 – 50
Adjusts the modulation depth. Adjusts the modulation rate.
ZOOM G7.1ut
Effect Types and Parameters
PARM3 PARM4
Fine
Balance
-25 – 25 0 – 100
Allows fine adjustment of Adjusts the balance between
pitch shift amount in Cent (1/ original sound and effect
100 semitone) steps. sound.
PARM3 PARM4
PdlPosi
0 – 10 0 – 100
Sets the pitch shift amount.
Depending on the "Color"
Adjusts the tonal quality of the setting, the balance between
sound. original sound and effect
sound also changes
accordingly.
Color Mode Pedal minimum value Pedal maximum value
Up -1 octave + DRY +1 octave + DRY
5
Down
+1 octave + DRY -1 octave + DRY
Up
-700 cent + DRY +500 cent + DRY
6
Down
+500 cent + DRY -700 cent + DRY
Up -∞ (0 Hz) + DRY +1 octave
7
Down +1 octave -∞ (0 Hz) + DRY
Up -∞ (0 Hz) + DRY +1 octave + DRY
8
Down +1 octave + DRY -∞ (0 Hz) + DRY
PARM3 PARM4
Tone
0 – 10 Balance 0 – 100
Adjusts the balance between
Adjusts the tonal quality of the
original sound and effect
sound.
sound.
PARM3 PARM4
Resonance 0 – 10 Shape 0 – 10
Adjusts the resonance Adjusts the effect sound
intensity. envelope.
61