Using A Smartmedia Card (Utility Mode); Basic Utility Mode Operation Steps - Zoom 707II Guitar Operation Manual

If you want to check out the sample, press the
[SAMPLER] key to activate the sampler mode,
W
and press the [
currently selected sample.
6.
Press the [STORE/EXECUTE] key to
store the patch.
Assign other samples to other patches in the
same way.
7.
When all patches have been prepared,
select a patch in play mode to which a
sample was assigned.
8.
Press the [SAMPLER] key to activate
the sampler mode.
Using SmartMedia card (Utility Mode)
A SmartMedia card inserted in the 707II can hold up to five groups of patches and 60
samples. This section describes the utility mode that provides various SmartMedia card
related functions.
Basic utility mode operation
steps
The steps for various utility mode functions are
similar, as described below.
1.
Verify that a SmartMedia card is
inserted in the card slot.
When a SmartMedia card is inserted, the
[SMART MEDIA] LED is lit. (For information
on how to insert a SmartMedia card, see p. 6.)
2.
In play mode, press the [UTILITY] key.
The 707II enters the utility mode. The
indication "LOAD" appears on the display.
L O A D
3.
Use the TYPE [
the desired function.
The utility mode comprises the following
functions.
28
ZOOM 707II GUITAR
] foot switch to play the
W Q
]/[ ] keys to call up
For a patch where the expression pedal is
assigned to SAMPLER, you can also push the
expression pedal fully down to set the sampler
function to ON.
W
9.
Press the [ ] foot switch.
The sample assigned to the patch is played.
Use the MODULE [
10.
W Q
[ ]/[ ] foot switches to control play/
stop/rewind/fast-forward.
Press the [SAMPLER] key to turn the
11.
sampler mode off.
● LOAD (Load patch)
Loads a single patch stored on a SmartMedia
card into the memory of the unit (USER group).
● SAVE (Save patch)
Stores a single patch from the memory of the
unit (USER group) on a SmartMedia card.
● ALLOAD (Load patch group)
Loads an entire patch group stored on a
SmartMedia card into the memory of the
unit (USER group).
● ALSAVE (Save patch group)
Stores all patches of the USER group from the
memory of the unit on a SmartMedia card.
● P DEL (Delete patch group)
Deletes a patch group stored on a SmartMedia card.
● SP DEL (Delete sample)
Deletes a sample stored on a SmartMedia
card.
● FORMAT
Formats a SmartMedia card card.
E R
]/[ ] keys, and