Zoom 707II Guitar Operation Manual page 36

COLOR
Parameter 3
Selects sound character.
TYPE 5
TREMOL (Tremolo)
Periodically varies the level of the sound.
DEPTH
Parameter 1
Adjusts modulation intensity.
RATE
Parameter 2
Adjusts modulation speed.
CLIP
Parameter 3
Adjusts modulation waveform clip. Larger values result
in more intense modulation.
TYPE 6
A-PAN (Auto-Pan)
This stereo panning effect periodically moves the sound
back and forth between right and left when two
amplifiers are used. When one amplifier is used, the
effect is a tremolo effect.
WIDTH
Parameter 1
Adjusts effect width.
RATE
Parameter 2
Adjusts modulation speed.
CLIP
Parameter 3
Adjusts modulation waveform clip. Larger values result
in more intense modulation.
TYPE 7
A-WAH (Auto Wah)
This effect gives a varying wah sound that depends on
the picking intensity.
POSI
Parameter 1
Selects connection point of MOD module.
• AF:
After CABINET module
• bF
Before DRIVE module
Parameter 2 RESO
Adjusts wah effect intensity
SENS
Parameter 3
Adjusts sensitivity. Negative values result in downward
wah.
TYPE 8
P-WAH (Pedal Wah)
This effect lets you control wah with the expression pedal.
POSI
Parameter 1
Selects connection point of MOD module.
• AF:
After CABINET module
• bF
Before DRIVE module
Parameter 2 FREQ
Adjusts wah effect center frequency.
DIRMIX
Parameter 3
Adjusts direct sound mix.
TYPE 9 STEP
This is a special effect with step-like filter characteristics.
Parameter 1 DEPTH
Adjusts modulation intensity.
RATE
Parameter 2
Adjusts modulation speed.
RESO
Parameter 3
Adjusts wah effect intensity.
36
ZOOM 707II GUITAR
1 – 4
TYPE 10
This is a pitch shifter with a range of 2 octave up and 1
octaves down.
Parameter 1
Sets the pitch shift amount. The "dt" setting results in a
detune effect.
0 – 10
Parameter 2
Adjusts effect tone.
1 – 30
Parameter 3
Adjusts balance between direct sound and effect sound.
0 – 10
Higher values emphasize effect sound.
TYPE 11
This effect lets you vary the pitch in real time, using the
expression pedal.
Parameter 1
Selects the pedal pitch type. Depending on the type, the
pitch differs when pushing the pedal down or when
0 – 10 raising it.
1 – 30
P-PIT
TYPE
0 – 10
AF, bF
1 – 10
Parameter 2
Adjusts effect tone.
-10 – -1, 1 – 10
TYPE 12
Produces a metallic sound.
Parameter 1
Selects connection point of MOD module.
• AF:
After CABINET module
AF, bF • bF Before DRIVE module
Parameter 2
Sets frequency for ring modulation effect.
The tone changes depending on the frequency setting.
1 – 10
Parameter 3
Adjusts balance between direct sound and effect sound.
0 – 10
TYPE 13
This effect automatically creates a "violin playing"
sound.
Parameter 1
Selects connection point of MOD module.
0 – 10
• AF: After CABINET module
• bF Before DRIVE module
1 – 30
Parameter 2
Adjusts attack speed.
0 – 10
Parameter 3
Adjusts attack curve.
PITCH (Pitch Shifter)
SHIFT
-12 – 1, dt, 1 – 12, 24
TONE
BAL
P-PIT (Pedal Pitch)
TYPE
Pedal Pedal
minimum value maximum value
1
-100 cent Original sound only
2
Original sound only -100 cent
3
DOUBLING Detune + DRY
4
Detune + DRY DOUBLING
5
0 cent +1 octave
6
+1 octave
7
0 cent -2 octaves
8
-2 octaves
9
-1 octave + DRY +1 octave + DRY
10
+1 octave + DRY -1 octave + DRY
11
-700 cent + DRY 500 cent + DRY
12
500 cent + DRY -700 cent + DRY
∞
13
- (0 Hz) + DRY +1 octave
∞
14
+1 octave - (0 Hz) + DRY
∞
15
- (0 Hz) + DRY +1 octave + DRY
∞
16
+1 octave + DRY - (0 Hz) + DRY
TONE
RING M (Ring Modulator)
POSI
RATE
BAL
SLOW-A (Slow Attack)
POSI
TIME
CURVE
0 – 10
0 – 30
1 – 16
0 cent
0 cent
0 – 10
AF, bF
1 – 30
0 – 30
AF, bF
1 – 30
1 – 10