Using The Rhythm Function - Zoom 707II Guitar Operation Manual

Using the Rhythm Function

The 707II incorporates 60 rhythm patterns which can be selected for playback. This is
convenient for parts practice or a quick jam session.
R
1.
Press the [
Rhythm pattern playback starts. The display
shows the currently selected pattern, and the
[BANK/PATCH] indicator briefly shows the
pattern number. The [RHYTHM] LED flashes
in sync with the rhythm pattern tempo.
P O W E R
2.
Use parameter knobs 1 – 3 to control
rhythm pattern play.
In play mode, parameter knobs 1 – 3 have the
following functions.
Parameter knob 1
Changes the rhythm
pattern type.
Parameter knob 2
Changes the rhythm
pattern tempo.
16
ZOOM 707II GUITAR
P
/ ] key in play mode.
A 0
Parameter knob 3
Changes the rhythm
pattern volume.
When you operate a parameter knob during
rhythm pattern play, the indication on the
display and [BANK/PATCH] indicator changes
temporarily.
8 B E A T
Rhythm pattern name
Parameter knob 1
B P M 1 2 0
Rhythm pattern tempo
Parameter knob 2
L V L 2 0
Rhythm pattern volume
Parameter knob 3
H
INT
• You can also switch patches during rhythm
pattern playback.
• You can also play a rhythm pattern in the
bypass/mute condition and in the edit mode, but
the parameter knobs cannot be used to control
the rhythm pattern in this case.
• The rhythm pattern type, tempo, and volume
settings revert to the default condition when the
unit is turned off and on again.
• You can also use the TYPE [
change the pattern type.
3.
To stop rhythm pattern playback,
R P
press the [ / ] key once more.
It is also possible to store a rhythm pattern for
specific patches. When you have assigned
rhythm patterns to patches and you set the
[PATCH SYNC] key to On, rhythm patterns
will be switched together with the patches (
26).
1
W Q
]/[ ] keys to
→
p.