Zoom 707II Guitar Operation Manual page 30

and the [BANK/PATCH] indicator shows the
load source bank (A – F) and patch number (0 –
9).
4.
Press the [STORE/EXECUTE] key.
The indication "SURE?" appears on the display.
5.
To carry out the operation, press the
[STORE/EXECUTE] key once more.
The single patch is loaded from the SmartMedia
card into the memory of the unit. When the
process is completed, the unit reverts to play
mode.
If you press the [CANCEL/EXIT] key instead
of the [STORE/EXECUTE] key, the load
operation is canceled.
N
OTE
• Any patch that is present in the target location
will be overwritten. Take care not to accidentally
overwrite a patch that you want to keep.
• Never insert or remove the SmartMedia card
while power to the unit is turned on. Otherwise all
data on the card may be lost.
Storing a group on a SmartMedia
card
You can store the USER group of the 707II on a
SmartMedia card as a patch group.
1.
In utility mode, select "ALSAVE" and
press the [STORE/EXECUTE] key.
The indication "GROUP" appears on the
display, and the [BANK/PATCH] indicator
shows the group number (1 – 5) for storing.
2.
Use the TYPE [
the patch group (1 – 5) for storing, and
then press the [STORE/EXECUTE]
key.
The indication "SURE?" appears on the display.
3.
To carry out the operation, press the
[STORE/EXECUTE] key once more.
The entire USER group of the 707II is stored on
the SmartMedia card. When the process is
completed, the unit reverts to play mode.
30
ZOOM 707II GUITAR
W Q
]/[ ] keys to select
If you press the [CANCEL/EXIT] key instead
of the [STORE/EXECUTE] key, the store
operation is canceled.
N
OTE
Any patch group that was stored on the
SmartMedia card in that position will be
overwritten. Be careful not to overwrite a group
that you wish to keep.
Loading a group from a
SmartMedia card
You can load a patch group stored on a
SmartMedia card into the memory of the unit.
1.
In utility mode, select "ALLOAD" and
press the [STORE/EXECUTE] key.
The indication "GROUP" appears on the
display, and the [BANK/PATCH] indicator
shows the group number (1 – 5) for loading.
W
2.
Use the TYPE [
the patch group (1 – 5) for loading,
and then press
EXECUTE] key.
The indication "SURE?" appears on the display.
3.
To carry out the operation, press the
[STORE/EXECUTE] key once more.
The entire selected patch group is loaded from
the SmartMedia card into the USER group of
the 707II. When the process is completed, the
unit reverts to play mode.
If you press the [CANCEL/EXIT] key instead
of the [STORE/EXECUTE] key, the load
operation is canceled.
N
OTE
All patches currently stored in the USER group of
the unit will be overwritten. Take care not to
accidentally overwrite patches that you want to
keep.
Q
]/[ ] keys to select
the [STORE/