Direct
Patterns
MEM
Patterns
MEM
MEMORY
5. Press the "
" button to leave the memory mode and return
to the Direct mode.
Attention:
The selected pattern will be cleared from the memory module
after closing the machine if you do not press the "
again when you have completed your selection.
Adding patterns or letters
While in the memory mode, press the "
"
.......
" button until the stitch number you have selected is
displayed, then add the new stitch or change the stitch length,
width, Auto-stop or mirror, if desire.
Clearing patterns or letters
If you wish to delete a certain stitch within in the memory
mode, use the "
" button or "
stitch number is displayed.
Press the "
" button to delete the selected pattern and the
next pattern in the back will move forward.
" button
.......
" button or the
" button until the actual
03
55