Darning Stitch - Euro-Pro INTELLI SEW 9136C Instruction Manual

03
38

DARNING STITCH

5.Position the fabric so that the needle is
2mm (1/16 inch) in front of the area to be
darned, and then lower the presser foot
lever.
When lowering the presser foot, do not push
in the front of the presser foot, otherwise the
darning will not be sewn with the correct size.
Pass the upper thread down through the
hole in the presser foot. Pull down the
buttonhole lever then push it back. The
buttonhole lever is positioned behind the
bracket on the buttonhole foot. Gently hold
the end of the upper thread in your left
hand, and then start sewing.
When you select any buttonhole pattern or
darning pattern, LCD screen will show
the figure "
to lower the buttonhole lever.
Darning stitches are sewn from the front of
the presser foot to the back, as shown.
If the sewing range is too big to sew, then
we suggest you can sew several times (or
cross sew) to get better sewing result.
Please Note:
Please Note:
", it is to remind you