Blind Hem - Euro-Pro INTELLI SEW 9136C Instruction Manual

5mm
Reverse Overcasting
side stitches

BLIND HEM

9:
02:
5mm
It takes practice to sew blind hems. Always
make a sewing test first.
Fold the fabric as illustrated with the wrong
side uppermost.
Reverse
side
Place the fabric under the foot. Turn the
handwheel forwards by hand until the
needle swings fully to the left. It should just
pierce the fold of the fabric. If it does not,
a
adjust the stitch width accordingly.
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
b
Sew slowly, guiding the fabric carefully
along the edge of the guide.
Turn over the fabric.
Blind hem for firm fabrics
Blind hem for stretch fabrics
Please Note:
03
31