Changing The Presser Foot - Euro-Pro INTELLI SEW 9136C Instruction Manual

CHANGING THE PRESSER FOOT

Attention:
Turn power switch to off ("O") when carrying out any of the
above operations!
02
Attaching the presser foot holder (1)
a
Raise the presser foot bar (a). Attach the presser foot holder (b)
as illustrated.
b
Attaching the presser foot (2)
Lower the presser foot holder (b) until the cut-out (c) is
e
directly above the pin (d).
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
c
b
engage automatically.
d
f
Removing the presser foot (3)
Raise the presser foot.
e
Raise the lever (e) and the foot will disengages.
Attaching the seam guide (4)
Attach the seam guide (g) in the slot as illustrated. Adjust
g
according to need for hems, pleats, etc.
23