Darning Stitch - Euro-Pro INTELLI SEW 9136C Instruction Manual

D
Stop
a a
b b
Start Start

DARNING STITCH

Stop
Select pattern 16 or 17 to get the darning
stitch. Change the presser foot to the
buttonhole foot.
Baste the upper fabric and the under fabric
together.
Select the needle position. Lower the
presser foot over the center of the tear.
Pull the button holder to rear.
Set the button guide plate on buttonhole
foot to the desired length.
The size of one darn cycle is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch
width is 7mm (9/32 inch).
a. The length of sewing.
b. The width of sewing.
03
37