Table of Contents
Advertisement
Contact
the workpiece
with the router and
cutter bit only after the router has reached full
speed. Turn the router motor "OFF" and allow
the cutter bit to come to a complete
stop
before removing
the router and cutter bit from
the workpiece.
SOFT START FEATURE
The soft start feature minimizes
torque twist,
customary
in larger router motors,
by limiting
the speed at which the motor starts. This
increases the motor's
life.
Fig. 8
ELECTRONIC FEEDBACK CONTROL
The electronic
feedback
control maintains
a constant
speed under load to provide a
smooth
finish.
LED WORKLIGHTS (Fig. 8)
Your router motor has 3 built-in worklights
located around the collet/nut
to provide high
visibility
of workpiece
when cutting.
These
lights are always "On" when the toggle switch
is in the "On" position.
"LIVE TOOL iNDiCATOR" LIGHT (Fig. 9)
Fig. 9
Your router also has a "Live Tool Indicator"
green light, located on the motor
housing top cap where the power cord enters the motor housing.
This green
light is always on when router motor is plugged
into power source.
HEAVY=DUTY
EDGE GUIDE (Fig.lO)
The Fixed-Base
Router comes with a heavy-
duty edge guide. This edge guide can be
used as an aid in routing applications
such as
decorative
edging,
straight edge planning and
trimming,
grooving,
dadoing
and slotting.
To attach the edge guide to the fixed base,
simply insert the edge guide rods into edge-guide
mounting slots either from the left or the right.
Fig. 10
Tighten the lever on the left by turning
it
clockwise
to secure the edge guide rod
(Fig.lO). Tighten the lever on right by turning
counterclockwise
to secure the rod (Fig.lO).
2768
ManuaLRevised_11-0307
Page 20
Hide quick links:
Advertisement
Table of Contents
