Safety Instructions; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Craftsman 320.2768 Operator's Manual

GENERAL POWER TOOL SAFETY WARNINGS
_, WARNING: Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
• Know your power tool. Read the operator's manual carefully. Learn the
applications, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire or serious injury.
• Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. if someone borrows this tool, make sure they
have these instructions also.
• The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
READ AND SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
• Keep the work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
inspect the tool cords periodically and, if damaged, have them repaired
at your nearest Sears Service Center. Be aware of the cord location.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
2768 Manuai_Revised_11-0307 Page 5