Table of Contents
Advertisement
,_
WARNING:
Be sure to read and understand
all instructions
in this manual
before using the jig saw. Failure to follow all instructions
may result in hazardous
radiation
exposure,
electric shock, fire, and/or serious personal injury.
,_
WARNING:
Do not attempt
to operate this tool until you have thoroughly
read all instructions,
safety rules, and warnings.
Failure to comply with them can
result in fire, electric shock, or serious personal injury. Save the manual and refer
to it frequently.
SAFETY PRECAUTIONS FOR LASERS
This jig saw has a built-in
laser light. The laser is a Class Ilia and emits output
power of a maximum
2.5mW and 650 wavelengths.
These lasers do not normally
present an optical
hazard. However, do not stare at the beam as this can cause
flash blindness.
The following
label is on your tool. It indicates where
the saw emits
the laser light. Be aware of the laser
bystanders
in the vicinity
of use are made aware
of the
_i_:!_'_io0_:
_,:_';;;;;......
dangers
of looking
directly
into the laser.
WARNING:
Laser light.
Laser radiation.
Avoid Direct Eye Exposure.
Do
not stare into beam. Only turn laser beam on when the saw is on the workpiece.
Class Ilia laser.
,_
WARNING:
Use of controls, adjustments
or performance
of procedures
other
than those specified
in this manual may result in hazardous
radiation exposure.
,_k WARNING:
The use of optical
instruments
such as, but not limited to,
telescopes
or transits to view the laser beam will increase eye hazard.
CAUTION:
Use of controls
or adjustments
or performance
of procedures
other than those specified
herein may result in hazardous
radiation exposure
*
Do not remove
or deface
any product
labels.
Removing
product labels
increases
the risk of exposure
to laser radiation.
=
The laser beam can be harmful
to the eyes. Always
avoid direct eye
exposure.
Do not look directly
into the laser beam output
aperture during
operation.
Do not project the laser beam directly
into the eyes of others. Turn
laser on only when making cuts.
=
Laser enhancing
safety glasses are included
to enhance the laser beam in
bright light conditions.
Do not wear these glasses if they interfere with the
safe operation
of this saw.
=
The laser on the jig saw is not a toy. Always keep out of the reach of children.
The laser light emitted from this device should
never be directed
towards
any
person for any reason.
28223
Manual_Revised_SO
03S0
Page 5
Hide quick links:
Advertisement
Table of Contents
